NIBE · Heat-pump or fixed-AC model
S2060
NIBE S2060 is a current R290 inverter-driven air-to-water outdoor heat pump, with the S2060-6 single-phase model shown on the UK product page.
Specifications
| Specification | Value |
|---|---|
| Type | outdoor air-to-water heat pump |
| Minimum operating temperature (°C) | -25 |
| Refrigerant | R290 |
| Headline SCOP | up to 5.33 under the published product basis |
| UK model | S2060-6 1x230V |
| Integrated hot water cylinder | No |
NIBE S2060 is a current inverter-driven air-to-water heat pump using R290 refrigerant. The current UK model is S2060-6 1x230V.
Published performance
S2060 has a SCOP (seasonal coefficient of performance) of up to 5.33 under its stated basis and an operating range extending down to an outdoor temperature of -25°C. Those headline values apply only on their defined test and operating bases.
System arrangement
S2060 is an outdoor heat-pump unit rather than a complete heating and hot-water system. It needs compatible NIBE controls, an indoor hydraulic arrangement and a hot-water cylinder where domestic hot water is required.
The specified S2060 freeze-protection arrangement does not require glycol or antifreeze valves.
The heating pump is a separate indoor component, not part of the S2060 outdoor enclosure. The outdoor unit also has no integrated hot-water cylinder.
Heating-system design
The complete system requires the exact S2060 code, compatible controls, an indoor hydraulic arrangement, a separate heating pump and a hot-water cylinder where domestic hot water is required.
S2060 is Quiet Mark certified.
Related entries
Brand
Reference type
Heat-pump or fixed-AC model
Last reviewed
31 Jul 2026
Current status
Current in the manufacturer's UK range.