Knowledge base / Brands / Fronius / Fronius Reserva Pro

Fronius · Home battery model

Fronius Reserva Pro

Fronius Reserva Pro is a current high-voltage LFP battery family with 11.9 to 31.9 kWh usable per tower and up to four towers in parallel.

Specifications

SpecificationValue
Usable capacity (kWh)11.9, 15.9, 19.9, 23.9, 27.9 or 31.9
Cell chemistryLFP
Scalableyes; three to eight modules per tower and up to four towers in parallel
Maximum stack capacity (kWh)127.6 by exact usable-capacity arithmetic; marketed as up to 128
Backup capableyes; requires a compatible hybrid inverter and approved switching and isolation
Warranty (years)10
Warranty retained capacity (%)80
IP ratingIP65
Operating-temperature range (°C)-20 to 50, with temperature-dependent power limits
Module count3 to 8 per tower
Nominal voltage (V)212.52 to 566.72
Maximum output current (A)50, subject to inverter limit
Maximum parallel towers4
Compatible fronius invertersPrimo GEN24 Plus, Symo GEN24 Plus and Verto Plus, subject to exact compatibility documents

Fronius Reserva Pro is a current high-voltage LFP battery for larger residential, agricultural and commercial systems. It is a different platform from the smaller Reserva range. Six tower sizes work with Primo GEN24 Plus, Symo GEN24 Plus and Verto Plus, subject to exact compatibility requirements.

Capacity and tower sizes

Reserva Pro 12.0 to 32.0 use three to eight modules. Exact usable capacities are 11.9, 15.9, 19.9, 23.9, 27.9 and 31.9 kWh. Nominal voltage rises from 212.52 to 566.72 V with module count.

Up to four towers can operate in parallel. Four maximum towers provide 127.6 kWh usable by exact arithmetic, rounded to a 128 kWh headline. Parallel operation still needs an approved inverter, matching tower configuration, communications and protection design.

Maximum battery output current is 50 A, subject to the inverter’s lower charge or discharge limit where applicable.

Operating environment

Reserva Pro is rated IP65 and permitted indoors or in a protected outdoor location. The ambient schedule is -20°C to 50°C, with temperature-dependent charge and discharge limits.

Backup and compatibility

The battery does not establish an islanded supply by itself. Backup and black-start functions require a supported hybrid inverter, suitable state of charge and the approved grid isolation, switching, protection and earthing arrangement. Available power and load starting behaviour depend on the complete system.

Compatibility should be checked by exact inverter power class and software version. A Fronius brand match alone is insufficient, particularly for older Symo Hybrid and non-Plus inverters.

Warranty

The UK warranty term is ten years with 80% state of health. The full terms, serial numbers, commissioning record and installation conditions determine the enforceable cover. The inverter and battery have separate warranty positions.

Brand

Fronius

Reference type

Home battery model

Last reviewed

31 Jul 2026

Current status

Current in the manufacturer's UK range.