Knowledge base / Brands / Pylontech / Pylontech Force H3

Pylontech · Home battery model

Pylontech Force H3

Pylontech Force H3 is a current high-voltage residential battery tower using two to seven 5.12 kWh FH10050 modules.

Specifications

SpecificationValue
Usable capacity (kWh)9.69 to 34.01
Nominal capacity (kWh)10.24 to 35.84
ScalableYes
Maximum stack capacity (kWh)34.01 usable; 35.84 nominal
Warranty (years)10
IP ratingIP65 current datasheet; IP55 installation manual
Battery moduleFH10050
Module count2 to 7
Module nominal voltage (V)102.4
Module nominal energy (kWh)5.12
Depth of discharge (%)95
Normal charge/discharge current (A)50
Maximum charge/discharge current (A)55 for 15 minutes

Pylontech Force H3 is a high-voltage residential battery tower using FH10050 modules and an FC1000 controller. The current range spans two to seven modules, giving 10.24 to 35.84 kWh nominal and 9.69 to 34.01 kWh usable energy.

Electrical configuration

Each module is rated at 102.4 V and 5.12 kWh. Modules connect in series, producing a nominal system voltage from 204.8 to 716.8 V as the tower grows. Depth of discharge is 95%, normal charge and discharge current is 50 A and 55 A is available for up to 15 minutes.

Current ingress-protection records conflict: the latest specification gives IP65, while the Force H3 installation manual gives IP55 and warns against frost and direct sunlight. The nameplate and installation document supplied with the unit therefore determine the applicable rating and siting conditions.

Warranty and compatibility

The current European and UK Force warranty gives ten years for battery-module performance and defines minimum capacity as 60% of nominal energy, subject to the full warranty conditions.

Force H3 uses FH10050 modules and an FC1000 controller. Inverter compatibility must be checked for the exact inverter model and firmware combination.

Reference type

Home battery model

Last reviewed

31 Jul 2026

Current status

Current in the manufacturer's UK range.