Pylontech · Home battery model
Pylontech ReefMagic
Pylontech ReefMagic is a high-voltage LFP tower whose live table covers 15 to 52.5 kWh; its attached PDF extends to 75 kWh but conflicts with that table.
Specifications
| Specification | Value |
|---|---|
| Nominal capacity (kWh) | 15 to 52.5 in the live table; attached PDF extends to 75 per tower |
| Cell chemistry | LFP |
| Scalable | yes; 2 to 7 modules in the live table, while the attached PDF extends to 10 and up to 6 groups in parallel |
| Maximum stack capacity (kWh) | 52.5 in the live table; 75 in the conflicting attached PDF |
| IP rating | IP65 |
| Operating-temperature range (°C) | standard: charge 0 to 55, discharge -10 to 55; Pro: charge and discharge -20 to 55 |
| Model number | ReefMagic |
| Battery module | RMB70100 or RMB70100-Pro |
| Controller | RMC1000 or RMC1000-Pro |
| Module nominal energy (kWh) | 7.5 |
| Module nominal voltage (V) | 73.6 |
| Nominal capacity (Ah) | 102 |
| Module count in family datasheet | 2 to 10 per tower |
| Configurations in current structured product table | 2 to 7 modules and 15 to 52.5 kWh |
| Depth of discharge (%) | 95 |
| Normal charge/discharge current (A) | 50 |
| Connectivity | Modbus RTU and CAN |
Pylontech ReefMagic is a high-voltage, stackable LFP battery platform. It was added to Pylontech’s live global product database on 23 July 2026. UK new-supply and warranty terms are unconfirmed.
Capacity and tower sizes
Each RMB70100 or RMB70100-Pro module is rated at 7.5 kWh, 73.6 V and 102 Ah. The PDF attached to the current product page covers this complete tower schedule:
| Modules | Nominal energy | Nominal tower voltage | Live API code |
|---|---|---|---|
| 2 | 15 kWh | 147.2 V | RM-15-AU |
| 3 | 22.5 kWh | 220.8 V | RM-22-AU |
| 4 | 30 kWh | 294.4 V | RM-30-AU |
| 5 | 37.5 kWh | 368 V | RM-37-AU |
| 6 | 45 kWh | 441.6 V | RM-45-AU |
| 7 | 52.5 kWh | 515.2 V | RM-52-AU |
| 8 | 60 kWh | 588.8 V | not present in the live API table |
| 9 | 67.5 kWh | 662.4 V | not present in the live API table |
| 10 | 75 kWh | 736 V | not present in the live API table |
The live structured technical table does not match that attached sheet. It lists only RM-15-AU to RM-52-AU, corresponding to two to seven modules and 15 to 52.5 kWh. Its charge-upper-voltage sequence is also misaligned with the module and system-voltage rows. The public page therefore reports the broader PDF schedule but does not treat eight-, nine- or ten-module configurations as settled without a project-specific Pylontech confirmation.
The product introduction and PDF permit up to six groups in parallel and describe up to 450 kWh, based on six 75 kWh towers. Because the live technical table currently stops at 52.5 kWh, this is a manufacturer-source conflict rather than a configuration to infer from the headline alone. Controller version, module version, cabling, protection, inverter protocol, firmware and a current approved design must match.
Current, enclosure and temperature
The normal charge and discharge current is 50 A. Higher figures are time-limited: 55 A for 15 minutes and 65 A for 15 seconds. The system has 95% depth of discharge, IP65 protection, Modbus RTU and CAN communication and integrated aerosol firefighting.
Standard modules charge from 0°C to 55°C and discharge from -10°C to 55°C. Pro modules extend both ranges to -20°C to 55°C and add self-heating. The precise module suffix therefore matters for a cold location.
Complete-tower mass rises from 135 kg for two modules to 621 kg for ten.
Lifecycle and warranty record
Design life is 15 years and cycle life is more than 8,000 cycles at 25°C. Neither figure is a warranty duration. UK warranty cover and new-supply availability are unconfirmed.
Related entries
Brand
Reference type
Home battery model
Last reviewed
31 Jul 2026
Current status
UK new-supply status is unconfirmed.