Wallbox · EV charger model
Wallbox Pulsar Pro
Wallbox Pulsar Pro is a shared and commercial AC charger rated up to 7.4 or 22 kW, with RFID and OCPP support.
Specifications
| Specification | Value |
|---|---|
| Rated power (kW) | 7.4 single-phase or 22 three-phase |
| Supply phases | single or three, according to version |
| Connector arrangement | tethered or untethered |
| Cable length (m) | 5 or 7 on tethered versions |
| Socket type | shuttered Type 2 on socketed versions |
| Smart charging | yes; app schedules, remote control and managed access |
| OCPP (Open Charge Point Protocol) version | supported on 2025 and 2026 products; exact version unconfirmed |
| Load balancing | yes; static included; dynamic requires an additional meter |
| Solar integration | yes; 2025 W-code adds three-phase solar charging; 2026 PPR3 supports phase-switching solar optimisation |
| PEN (protective earth and neutral) fault detection | yes; only the 2025 T-code establishes UK open-PEN protection; not established for 2026 PPR3 |
| Connectivity | Wi-Fi, Bluetooth and 4G; Ethernet standard on the socket version |
| Warranty (years) | 3 |
| IP rating | IP55 |
| Operating-temperature range (°C) | -30 to 50; derating may apply above 40 |
| Access control | Wallbox app, RFID and NFC-ready hardware |
| Impact-protection rating | IK10 |
Wallbox Pulsar Pro is an AC charger for shared residential parking, workplaces and fleets. The 2025 range covers 7.4 kW single-phase and 22 kW three-phase versions, using either a shuttered Type 2 socket or a fixed 5 or 7 m Type 2 cable.
Access and connectivity
Pulsar Pro supports access through the Wallbox app and RFID. Current hardware is also NFC ready. Wi-Fi, Bluetooth and 4G are included, with Ethernet standard on the socket version. The initial 4G service period is two years, followed by a paid extension.
The charger supports OCPP and Wallbox Business Portal operation. Its exact OCPP version is unconfirmed for both generations, so a backend’s protocol requirement must be checked before procurement.
Static load management is included. Dynamic load management requires an additional meter. Solar charging is also meter-dependent: feature code W identifies three-phase solar charging in the 2025 range, while the 2026 PPR3 product can switch automatically from three-phase to single-phase operation for solar optimisation.
Metering and product generations
The 2025 version has an internal Class A-equivalent meter with error no greater than 2%. Its codes begin PRPX:
| Position | Codes and meaning |
|---|---|
| Output | 0 5 m; M 7 m; W shuttered socket; A 5 m with shutters; B 7 m with shutters |
| Connector | 2 Type 2 |
| Power | 2 7.4 kW; 4 22 kW |
| Feature | U PLC/4G/RFID/Ethernet; W adds three-phase solar charging; T UK open-PEN/4G/RFID; K welding protection/4G/RFID |
| Custom | XX2 black |
The 2026 socketed three-phase 22 kW model is PPR3-W-2-4-Y-002, product number 100000827. It adds an integrated MID meter and ISO 15118 support. The PPR3 code is a distinct generation, not an interchangeable spelling of PRPX.
UK open-PEN protection is established only for feature code T in the 2025 range. It is not established for the 2026 PPR3-W-2-4-Y-002, so the older option cannot be back-applied to the new generation.
Protection and warranty
Pulsar Pro is rated IP55 and IK10, includes 6 mA DC residual-current detection and has a UK open-PEN part-code option.
The product warranty is three years.
Related entries
Brand
Reference type
EV charger model
Last reviewed
31 Jul 2026
Current status
Current in the manufacturer's UK range.