Hypervolt · EV charger model
HYPV-2.0-7
HYPV-2.0-7 is the formal model number for Hypervolt's superseded Home 2.0 chargepoint generation, retained in support and GOV.UK records.
Specifications
| Specification | Value |
|---|---|
| Rated power (kW) | 7.4 in current records; 7 kW at 32 A and 230 V in the archived exact-code manual |
| Supply phases | single |
| Connector arrangement | tethered Type 2 or Type 1 |
| Cable length (m) | 5 or 7.5 for the archived exact code; 10 also available for the current Home 2.0 |
| Smart charging | yes, with Eco, Super Eco and Boost modes |
| Load balancing | yes, automatic through primary current-transformer measurement |
| Solar integration | yes, through the primary current transformer |
| PEN (protective earth and neutral) fault detection | yes, integrated |
| Connectivity | 2.4 GHz Wi-Fi, Bluetooth adoption and optional cellular in current support page |
| Warranty (years) | 36-month limited hardware warranty in archived exact-code manual |
| IP rating | IP54; IK08 impact rating |
| Operating-temperature range (°C) | historical manual conflicts between -20 and -25 minimum; current support page states -25 to 40 |
| Grant-list record | eligible for residential and commercial grants in 15 June 2026 GOV.UK list |
HYPV-2.0-7 is the model number printed in the declaration of conformity for Hypervolt’s Home 2.0 domestic chargepoint. It is an earlier tethered, single-phase product rather than the current Home 3 Pro.
Rating and cable record
The current GOV.UK list and Hypervolt support page record a 7.4 kW maximum. The archived exact-code manual describes its output as 7 kW at 32 A and 230 V. These are two presentations of the same nominal single-phase current limit.
The archived exact-code options are 5 m and 7.5 m tethered cables, whereas the current Home 2.0 range also has a 10 m option. Paperwork for an installed unit establishes the cable and connector actually supplied.
Protection and environment
The charger includes open-PEN protection and 6 mA DC fault-current detection, but no built-in AC residual-current protection. Its Home 2.0 installation guide requires an individual Type A double-pole RCD or RCBO not exceeding 30 mA. A separate circuit breaker provides overcurrent protection where an RCD is used instead of an RCBO. The enclosure is rated IP54 and IK08.
The exact-code manual is internally inconsistent on operating range: its technical sheet gives a minimum of -20°C, while its safety section gives -25°C. The current Home 2.0 support page also gives -25°C. All three give an upper value of 40°C, so the rating and paperwork for an installed unit remain the relevant record.
Home 2.0 uses the Hypervolt app, 2.4 GHz Wi-Fi and Bluetooth for adoption. Its primary current transformer measures site import and export for automatic load management and solar-aware Eco and Super Eco charging. The separate second-transformer battery monitoring belongs to Home 3.0 and Home 3 Pro, not Home 2.0.
Lifecycle and register status
Hypervolt says it could not sell Home 2 after December 2022 because of the incoming smart-chargepoint rules. It continues patch and bug-fix work as required for the installed base. The original exact-code manual stated a 36-month limited hardware warranty for correctly installed products; an individual unit follows its own dated terms.
The GOV.UK spreadsheet updated on 15 June 2026 still lists HYPV-2.0-7 for residential and commercial grant use. Continuing eligibility is separate from the manufacturer’s superseded sales status.
Related entries
Brand
Reference type
EV charger model
Last reviewed
31 Jul 2026
Current status
Superseded product; relevant to installed systems and replacement identification.