Pylontech · Home battery model
Pylontech Force H2 V2
Pylontech Force H2 V2 is a superseded high-voltage tower with two to four FH9637M modules and an FC0500M-40S-V2 controller.
Specifications
| Specification | Value |
|---|---|
| Nominal capacity (kWh) | 7.104 to 14.208 |
| Scalable | yes; two to four modules |
| Warranty (years) | 10 |
| Warranty retained capacity (%) | 60 of nominal energy |
| IP rating | IP55 |
| Model number | Force H2 V2 |
| Battery module | FH9637M |
| Controller | FC0500M-40S-V2 |
| Module nominal voltage (V) | 96 |
| Module nominal energy (kWh) | 3.552 |
| Module count | 2 to 4 |
| Dimensions (mm) | 450 x 296 x 822 to 1,414 for the complete tower |
| Weight (kg) | 82 to 152 for the complete tower |
| Connectivity | CAN bus and Modbus RTU |
Pylontech Force H2 V2 is a high-voltage LFP tower built from FH9637M modules and an FC0500M-40S-V2 controller. The V2 controller suffix distinguishes it from the earlier Force H2. It is absent from Pylontech’s current product catalogue, while its manual and current European and UK Force warranty remain available.
Capacity and configuration
Each tower uses two, three or four FH9637M modules. A module is rated at 96 V and 3.552 kWh, producing nominal tower capacities of 7.104, 10.656 or 14.208 kWh. Pylontech’s table rounds these to 7.10, 10.65 and 14.20 kWh.
The two-module tower is 822 mm high and weighs 82 kg. Three modules increase this to 1,118 mm and 117 kg, while four modules reach 1,414 mm and 152 kg. Width and depth remain 450 by 296 mm. Protection is IP55, with CAN bus or Modbus RTU communications.
Module and controller boundary
FH9637M is a series-connected high-voltage module, not a standalone 96 V battery. A module measures 450 by 296 by 296 mm and weighs 35 kg. The complete tower must use the specified controller, supported module count and compatible inverter protocol.
Force H2 V2 should not be identified as the earlier Force H2 solely because both use FH9637M modules. Their FC0500M-40S and FC0500M-40S-V2 controller designations, firmware and service documents are distinct.
Installation record
IP55 does not mean unrestricted outdoor placement. Installation conditions exclude immersion, rain and other water sources and address frost, direct sunlight and temperature control. Structural support, clearances and access need to reflect the complete tower weight.
Warranty record
The current European and UK Force terms name Force H2 V2 and define its V2 controller for two to four FH9637M modules. They give ten years for battery-module performance and 60% of nominal energy as minimum capacity. A separate time-value replacement statement uses 80% of usable capacity. The system’s dated terms and installation record determine actual cover.
Related entries
Brand
Reference type
Home battery model
Last reviewed
31 Jul 2026
Current status
Superseded product; relevant to installed systems and replacement identification.