Sigenergy · EV charger model
Sigen EV DC Charging Module
Sigen EV DC Charging Module is an optional 12.5 or 25 kW CCS2 module for an established SigenStor system, with vehicle and V2X support dependent on current compatibility.
Specifications
| Specification | Value |
|---|---|
| Connector arrangement | CCS2 |
| OCPP (Open Charge Point Protocol) version | OCPP 1.6J ED2 |
| Warranty (years) | 3 |
| IP rating | IP66 |
| Charging type | DC, integrated with SigenStor |
| Maximum charge/discharge power (kW) | 12.5 or 25 |
| Output voltage V | 150 to 1000 |
| Maximum output current (A) | 40 or 80 |
| Authentication | RFID card, mySigen app or no authentication |
Sigen EV DC Charging Module is an optional part of the established SigenStor system. It uses the system’s DC side to charge a compatible vehicle through CCS2. It is not a standalone wallbox and must be used with a Sigen Energy Controller.
Two power versions
The module comes in 12.5 and 25 kW versions. Both have a 150 to 1,000 V output range and bidirectional charge and discharge operation. Maximum output current is 40 A for the 12.5 kW module and 80 A for the 25 kW module.
Authentication options are RFID card, the mySigen app or no authentication. The module supports OCPP 1.6J ED2, uses smart air cooling and has an IP66 ingress rating. Actual charge power remains limited by the vehicle, site and complete SigenStor system.
V2X is conditional
Sigenergy presents the module as V2X-ready and publishes both charge and discharge ratings. V2X functionality is vehicle-dependent, and a CCS2 inlet or bidirectional module specification does not establish current vehicle-to-home or vehicle-to-grid operation for a particular car.
Warranty
The European SigenStor terms list three years for the EV DC module.
Related entries
Brand
Reference type
EV charger model
Last reviewed
31 Jul 2026
Current status
Current in the manufacturer's UK range.